Honda S2000 Front Bumper Splitter - Lip

This S2000 Front Bumper Splitter - Lip, will fit your Honda.

To fit the front splitter please use 4 mm rivets or M6 bolts.

You need to fix bolts/rivets every 100mm to the lower lip of your front bumper.

The front splitter is carrying huge amount of downforce.

You need to use one pair of splitter support rods if you stick the splitter out by 50-75mm.

You need to use two or three pairs of splitter support rods if you stick the splitter out by 75-100mm.

We do not recommend sticking this splitter out by more than 100mm out of the bumper.